Boundary Conditions That Are Not Set to AutoEnclosure

Last Updated: 
Wednesday, September 6, 2017

Software/Versions Affected:

For files made with THERM 5.0 Beta 2 and glazing systems imported from WINDOW 5.01 Beta, the Radiation Model in the boundary conditions (in almost all cases these boundary conditions will be the glazing system boundary conditions imported from WINDOW 5) will probably be set to "Enclosure". This can be changed to the "AutoEnclosure" setting by going into the Boundary Condition Library and editing the boundary condition. In the Radiation section of the Boundary Conditions definition, click on the "Automatic Enclosure Model" and that change will then be reflected in all the boundary condition segments that are set to this boundary condition.