THERM 6.3 Documentation
You must have Adobe Acrobat 9.0 (or higher) PDF Reader installed on your computer to open these documents.
NFRC THERM 6.3 /
WINDOW 6.3 Simulation Manual
December 2011:
 |
Entire Manual in PDF Format approximate 13 MB |
|
|
List of Manual Changes |
Simulation Speed:
|
|
See how fast THERM runs on various processors |
Sample Files:
These sample files are from the NFRC THERM 5.2 /
WINDOW 5.2 Simulation Manual. There may be a few slight difference between
the files and those shown in the manual (for example the spacer in the
aluminum slider example). When running them in THERM 6.3, make sure to
regenerate boundary conditions, and when using them in WINDOW 6.3, make sure
to recalculate all the results.
|
|
Aluminum Slider Example
Files (zip file) |
THERM 2 User's
Manual:
The THERM 6.3 User's Manual has not been
completed yet, so in the meantime, the following documents will cover most
of the features of the program.
|
|
Entire Manual in PDF Format approx. 2.1 MB |
||||||||||||||||||||||||||
|
|
By Chapters,
in separate PDF files:
|
Other Useful Information:
|
|
THERM 2.1 (including 2.1a) New Features Documentation |
|
|
THERM Drawing Tips
(This is Chapter 10 from an older THERM manual, which has some valuable drawing information that is not yet in any other manual. It references files in a CD that are unfortunately no longer available) |
|
|
Teaching Students About Two-Dimensional Heat Transfer Effects in
Buildings, Building Components, Equipment, and Appliances Using
THERM 2.0 Published in ASHRAE Transactions 1999, Vol 105, Part 1. |
You must have Adobe Acrobat 5.0 (or higher) PDF Reader installed on your computer to open these documents.
Updated: 01/03/12